Production value optimization with intermediate jig product recirculation
Silesian University of Technology, Department of Electrical Engineering and Control in Mining, 44-100 Gliwice, ul. Akademicka 2, Poland
a Corresponding author: Joachim.Pielot@polsl.pl
The paper describes the result of the production value increase in systems with two and three jigs and recirculation of the interemediate product compared to the output value obtained from a single jig. The increase is greater when the reference ash content in the concentrate is lower.
© Owned by the authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.