E3S Web of Conf.
Volume 225, 2021II International Conference “Corrosion in the Oil & Gas Industry” 2020
|Number of page(s)||4|
|Section||Corrosion Mechanisms and Testing Methods|
|Published online||05 January 2021|
Effect of heat treatment on the microstructure and corrosion properties of cast duplex stainless steels
Peter the Great St.Petersburg Polytechnic University, 195427, Polytechnicheskaya 29, Saint Petersburg, Russia
* Corresponding author: email@example.com
The effect of the quenching temperature on the pitting corrosion resistance of lean duplex stainless steel (DSS) were examined. Using thermodynamic modeling of phase formation processes in steel during solidification and subsequent cooling was shown that the equal amount of austenite and ferrite is achieved at 1210°С for examined composition. Experimental steel samples were quenched from 1100 and 1200°С. It was found that as the temperature rises, the pitting potential increases significantly due to the achievement of a favorable phase ratio. The results of this experimental study made it possible to develop a heat treatment that provides high corrosion properties of lean DSS.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.