Open Access
Issue
E3S Web Conf.
Volume 505, 2024
3rd International Conference on Applied Research and Engineering (ICARAE2023)
Article Number 01004
Number of page(s) 11
Section Materials Science
DOI https://doi.org/10.1051/e3sconf/202450501004
Published online 25 March 2024
  1. Garreta, E., Kamm, R. D., Chuva de Sousa Lopes, S.M., Lancaster, M.A., Weiss, R., Trepat, X., … & Montserrat, N. (2021). Rethinking organoid technology through bioengineering. Nature Materials, 20(2), 145–155. [Google Scholar]
  2. Vrana, N., Knopf-Marques, H., & Barthes, J. (Eds.). (2020). Biomaterials for organ and tissue regeneration: new technologies and future prospects. Woodhead Publishing. [Google Scholar]
  3. Balguri, P. K., Samuel, D. H., & Thumu, U. (2021). A review on mechanical properties of epoxy nanocomposites. Materials Today: Proceedings, 44, 346–355 [Google Scholar]
  4. Hofer, M., & Lutolf, M. P. (2021). Engineering organoids. Nature Reviews Materials, 6(5), 402–420. [Google Scholar]
  5. Basavapoornima, C., Kesavulu, C. R., Maheswari, T., Pecharapa, W., Depuru, S. R., & Jayasankar, C. K. (2020). Spectral characteristics of Pr3+-doped lead based phosphate glasses for optical display device applications. Journal of Luminescence, 228, 117585. [CrossRef] [Google Scholar]
  6. Saxena, K. K., & Lal, A. (2012). Comparative Molecular Dynamics simulation study of mechanical properties of carbon nanotubes with number of stone-wales and vacancy defects. Procedia Engineering, 38, 2347–2355. [CrossRef] [Google Scholar]
  7. Hasan, A. (Ed.). (2017). Tissue engineering for artificial organs: regenerative medicine, smart diagnostics and personalized medicine. John Wiley & Sons. [Google Scholar]
  8. Godavarthi, B., Nalajala, P., & Ganapuram, V. (2017, August). Design and implementation of vehicle navigation system in urban environments using internet of things (IoT). In IOP Conference Series: Materials Science and Engineering (Vol. 225, No. 1, p. 012262). IOP Publishing. [CrossRef] [Google Scholar]
  9. Kumari, C. U., Murthy, A. S. D., Prasanna, B. L., Reddy, M. P. P., & Panigrahy, A. K. (2021). An automated detection of heart arrhythmias using machine learning technique: SVM. Materials Today: Proceedings, 45, 1393–1398. [CrossRef] [Google Scholar]
  10. Saxena, K. K., Srivastava, V., & Sharma, K. (2012). Calculation of Fundamental Mechanical Properties of Single Walled Carbon Nanotube using Non-local Elasticity. Advanced Materials Research, 383, 3840–3844. [Google Scholar]
  11. Tripathi, G. P., Agarwal, S., Awasthi, A., & Arun, V. (2022, August). Artificial Hip Prostheses Design and Its Evaluation by Using Ansys Under Static Loading Condition. In Biennial International Conference on Future Learning Aspects of Mechanical Engineering (pp. 815–828). Singapore: Springer Nature Singapore. [Google Scholar]
  12. Chen, Z., Sugimura, R., Zhang, Y. S., Ruan, C., & Wen, C. (2024). Organoids in concert: engineering in vitro models toward enhanced fidelity. Aggregate, e478. [CrossRef] [Google Scholar]
  13. Song, T., Kong, B., Liu, R., Luo, Y., Wang, Y., & Zhao, Y. (2024). Bioengineering Approaches for the Pancreatic Tumor Organoids Research and Application. Advanced Healthcare Materials, 13(1), 2300984. [CrossRef] [Google Scholar]
  14. Bai, L., Wu, Y., Li, G., Zhang, W., Zhang, H., & Su, J. (2024). AI-enabled organoids: Construction, analysis, and application. Bioactive Materials, 31, 525–548. [CrossRef] [PubMed] [Google Scholar]
  15. Lath, Y. V., Thool, A. R., & Jadhav, I. (2024). Regeneration of the Retina Using Pluripotent Stem Cells: A Comprehensive Review. Cureus, 16(2). [PubMed] [Google Scholar]
  16. Wang, M., Wu, Y., Li, G., Lin, Q., Zhang, W., Liu, H., & Su, J. (2024). Articular cartilage repair biomaterials: strategies and applications. Materials Today Bio, 100948. [Google Scholar]
  17. Arun, V., Singh, A. K., Shukla, N. K., & Tripathi, D. K. (2016). Design and performance analysis of SOA- MZI based reversible toffoli and irreversible AND logic gates in a single photonic circuit. Optical and quantum electronics, 48, 1–15. [CrossRef] [Google Scholar]
  18. Singh, P., Singh, A. K., Arun, V., & Dixit, H. K. (2016). Design and analysis of all-optical half-adder, half- subtractor and 4-bit decoder based on SOA-MZI configuration. Optical and Quantum Electronics, 48, 1–14. [Google Scholar]
  19. Schlegel, V., Engels, A., Stoycheva, V., Bifaretti, S., & Foitzik, A. H. (2021, February). From biomaterial to organoid-bioprinting for practice. In Materials Science Forum (Vol. 1016, pp. 1285–1290). Trans Tech Publications Ltd. [CrossRef] [Google Scholar]
  20. Reddy, K. S. P., Roopa, Y. M., Ln, K.R., & Nandan, N.S. (2020, July). IoT based smart agriculture using machine learning. In 2020 Second international conference on inventive research in computing applications (ICIRCA) (pp. 130–134). IEEE [Google Scholar]
  21. Agrawal, R., Singh, S., Saxena, K. K., & Buddhi, D. (2023). A role of biomaterials in tissue engineering and drug encapsulation. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221150740. [Google Scholar]
  22. Arun, V., Shukla, N. K., Singh, A. K., & Upadhyay, K. K. (2015, September). Design of all optical line selector based on SOA for data communication. In Proceedings of the Sixth International Conference on Computer and Communication Technology 2015 (pp. 281–285). [Google Scholar]
  23. SudhirSastry, Y. B., Krishna, Y., & Budarapu, P. R. (2015). Parametric studies on buckling of thin walled channel beams. Computational Materials Science, 96, 416–424. [Google Scholar]
  24. Ramadugu, S., Ledella, S. R. K., Gaduturi, J. N. J., Pinninti, R. R., Sriram, V., & Saxena, K. K. (2023). Environmental life cycle assessment of an automobile component fabricated by additive and conventional manufacturing. International Journal on Interactive Design and Manufacturing (IJIDeM), 1–12. [Google Scholar]
  25. Panda, S., Hajra, S., Mistewicz, K., Nowacki, B., In-Na, P., Krushynska, A., … & Kim, H. J. (2022). A focused review on three-dimensional bioprinting technology for artificial organ fabrication. Biomaterials science, 10(18), 5054–5080. [Google Scholar]
  26. Klak, M., Bryniarski, T., Kowalska, P., Gomolka, M., Tymicki, G., Kosowska, K., … & Wszola, M. (2020). Novel strategies in artificial organ development: what is the future of medicine?. Micromachines, 11(7), 646. [Google Scholar]
  27. Liu, H., Wang, Y., Cui, K., Guo, Y., Zhang, X., & Qin, J. (2019). Advances in Hydrogels in Organoids and Organs-on-a-Chip. Advanced Materials, 31(50), 1902042. [CrossRef] [Google Scholar]
  28. Ajith, J. B., Manimegalai, R., & Ilayaraja, V. (2020, February). An IoT based smart water quality monitoring system using cloud. In 2020 International conference on emerging trends in information technology and engineering (ic-ETITE) (pp. 1–7). IEEE. [Google Scholar]
  29. Swapna Sri, M. N., Anusha, P., Madhav, V. V., Saxena, K. K., Chaitanya, C. S., Haranath, R., & Singh, B. (2023). Influence of Cu particulates on a356mmc using frequency response function and damping ratio. Advances in Materials and Processing Technologies, 1–9. [CrossRef] [Google Scholar]
  30. Zhang, W., Lanzoni, G., Hani, H., Overi, D., Cardinale, V., Simpson, S., … & Reid, L. M. (2021). Patch grafting, strategies for transplantation of organoids into solid organs such as liver. Biomaterials, 277, 121067. [Google Scholar]
  31. Hirota, A., AlMusawi, S., Nateri, A. S., Ordóñez-Morán, P., & Imajo, M. (2021). Biomaterials for intestinal organoid technology and personalized disease modeling. Acta Biomaterialia, 132, 272–287. [CrossRef] [PubMed] [Google Scholar]
  32. Telagam, N., Kandasamy, N., & Nanjundan, M. (2017). Smart sensor network based high quality air pollution monitoring system using labview. International Journal of Online Engineering (iJOE), 13(08), 79–87. [CrossRef] [Google Scholar]
  33. Arora, G. S., & Saxena, K. K. (2023). A review study on the influence of hybridization on mechanical behaviour of hybrid Mg matrix composites through powder metallurgy. Materials Today: Proceedings. [Google Scholar]
  34. Huang, J., Jiang, Y., Ren, Y., Liu, Y., Wu, X., Li, Z., & Ren, J. (2020). Biomaterials and biosensors in intestinal organoid culture, a progress review. Journal of Biomedical Materials Research Part A, 108(7), 1501–1508. [Google Scholar]
  35. Kalejaiye, T. D., Barreto, A. D., & Musah, S. (2022). Translating Organoids into Artificial Kidneys. Current Transplantation Reports, 9(4), 276–286. [Google Scholar]
  36. Awasthi, A., Saxena, K. K., & Arun, V. (2020). Sustainability and survivability in manufacturing sector. In Modern Manufacturing Processes (pp. 205–219). Woodhead Publishing. [Google Scholar]
  37. Abdul Samat, A., & Yahaya, B. H. (2022). Biomaterials in Organoid Development. In Organoid Technology for Disease Modelling and Personalized Treatment (pp. 155–178). Cham: Springer International Publishing. [Google Scholar]
  38. Korpi, A. G., Țălu, Ş., Bramowicz, M., Arman, A., Kulesza, S., Pszczolkowski, B., … & Gopikishan, S. (2019). Minkowski functional characterization and fractal analysis of surfaces of titanium nitride films. Materials Research Express, 6(8), 086463. [Google Scholar]
  39. Singh, B., Saxena, K. K., Dagwa, I. M., Singhal, P., & Malik, V. (2023). Optimization Of Machining Characteristics of Titanium-Based Biomaterials: Approach to Optimize Surface Integrity for Implants Applications. Surface Review and Letters, 2340008. [Google Scholar]
  40. Arun, V., Singh, A. K., Shukla, N. K., & Tripathi, D. K. (2016). Design and performance analysis of SOA- MZI based reversible toffoli and irreversible AND logic gates in a single photonic circuit. Optical and quantum electronics, 48, 1–15. [CrossRef] [Google Scholar]
  41. Thakuri, P. S., Liu, C., Luker, G. D., & Tavana, H. (2018). Biomaterials-Based Approaches to Tumor Spheroid and Organoid Modeling. Advanced healthcare materials, 7(6), 1700980. [CrossRef] [Google Scholar]
  42. Ollé-Vila, A., Duran-Nebreda, S., Conde-Pueyo, N., Montañez, R., & Solé, R. (2016). A morphospace for synthetic organs and organoids: the possible and the actual. Integrative Biology, 8(4), 485–503. [Google Scholar]
  43. Gupta, T. K., Budarapu, P. R., Chappidi, S. R., Yb, S.S., Paggi, M., & Bordas, S.P. (2019). Advances in carbon based nanomaterials for bio-medical applications. Current Medicinal Chemistry, 26(38), 6851–6877. [CrossRef] [PubMed] [Google Scholar]
  44. Awasthi, A., Saxena, K. K., Dwivedi, R. K., Buddhi, D., & Mohammed, K. A. (2022). Design and analysis of ECAP Processing for Al6061 Alloy: a microstructure and mechanical property study. International Journal on Interactive Design and Manufacturing (IJIDeM), 1–13. [Google Scholar]
  45. Kim, S. K., Kim, Y. H., Park, S., & Cho, S. W. (2021). Organoid engineering with microfluidics and biomaterials for liver, lung disease, and cancer modeling. Acta biomaterialia, 132, 37–51. [CrossRef] [PubMed] [Google Scholar]
  46. Hoang, P., & Ma, Z. (2021). Biomaterial-guided stem cell organoid engineering for modeling development and diseases. Acta Biomaterialia, 132, 23–36. [CrossRef] [PubMed] [Google Scholar]
  47. Marchini, A., & Gelain, F. (2022). Synthetic scaffolds for 3D cell cultures and organoids: applications in regenerative medicine. Critical reviews in biotechnology, 42(3), 468–486. [CrossRef] [PubMed] [Google Scholar]
  48. Awasthi, A., Saxena, K. K., & Arun, V. (2021). Sustainable and smart metal forming manufacturing process. Materials Today: Proceedings, 44, 2069–2079. [CrossRef] [Google Scholar]
  49. D’Costa, K., Kosic, M., Lam, A., Moradipour, A., Zhao, Y., & Radisic, M. (2020). Biomaterials and culture systems for development of organoid and organ-on-a-chip models. Annals of biomedical engineering, 48, 2002–2027. [CrossRef] [PubMed] [Google Scholar]
  50. Kharat, V. J., Singh, P., Raju, G. S., Yadav, D. K., Gupta, M. S., Arun, V., … & Singh, N. (2023). Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Materials Today: Proceedings. [Google Scholar]
  51. Kumar, H., Devade, K., Singh, D. P., Giri, J. M., Kumar, M., & Arun, V. (2023). Severe plastic deformation: A state of art. Materials Today: Proceedings. [Google Scholar]
  52. Naik, B. R., Chadalla, S. K., Awasthi, A., Tondon, R., Yadav, D. K., Taher, W. M., & Nagpal, A. (2023). The application of metal matrix composite materials in propulsion system valves. Materials Today: Proceedings. [Google Scholar]
  53. Baptista, L. S., Mironov, V., Koudan, E., Amorim, É. A., Pampolha, T. P., Kasyanov, V., … & Granjeiro, J. M. (2024). Bioprinting using organ building blocks: spheroids, organoids, and assembloids. Tissue Engineering Part A. [Google Scholar]
  54. Awasthi, A., Saxena, K. K., & Arun, V. (2020). Sustainability and survivability in manufacturing sector. In Modern Manufacturing Processes (pp. 205–219). Woodhead Publishing. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.