EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 505 (2024) E3S Web Conf., 505 (2024) 01014 References
Open Access
Issue
E3S Web Conf.
Volume 505, 2024
3rd International Conference on Applied Research and Engineering (ICARAE2023)
Article Number 01014
Number of page(s) 8
Section Materials Science
DOI https://doi.org/10.1051/e3sconf/202450501014
Published online 25 March 2024
  1. Jiang, J., & Wang, Y. (2015). Microstructure and mechanical properties of the semisolid slurries and rheoformed component of nano-sized SiC/7075 aluminum matrix composite prepared by ultrasonic-assisted semisolid stirring. Materials Science and Engineering: A, 639, 350–358. [CrossRef] [Google Scholar]
  2. Bhadauria, A., Singh, L.K., & Laha, T. (2019). Combined strengthening effect of nanocrystalline matrix and graphene nanoplatelet reinforcement on the mechanical properties of spark plasma sintered aluminum based nanocomposites. Materials Science and Engineering: A, 749, 14–26. [CrossRef] [Google Scholar]
  3. Ogunsanya, O.A., Adewale Akinwande, A., Raj Mohan, R., Talabi, H., Saravana Kumar, M., Vignesh, M., & Bhowmik, A. (2023). Experimental investigation on the mechanical performance of the Al2O3 and ZrO2 added Al-Mg-Si alloy for structural applications. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231159777. [Google Scholar]
  4. Biswas, A., & Bhowmik, A. (2018). Study of heat generation and its effect during submerged arc welding (SAW) on mild steel plate at zero degree Celsius plate temperature. Materials today: Proceedings, 5(5), 13400–13405. [CrossRef] [Google Scholar]
  5. Bhadauria, A., Singh, L.K., & Laha, T. (2019). Nanoindentation and nanoscratch properties of graphene nanoplatelets reinforced spark plasma sintered aluminium-based nanocomposite. Advances in Materials and Processing technologies, 5(2), 295–302. [CrossRef] [Google Scholar]
  6. Kumaran, S.T., Uthayakumar, M., Slota, A., & Zajac, J. (2015). Application of Grey relational analysis in high speed machining of AA (6351)-SiC-B4C hybrid composite. International Journal of Materials and Product technology, 51(1), 17–31. [CrossRef] [Google Scholar]
  7. Xu, H., Luo, Q., Zhou, B., Zeng, Y., & Du, C. (2012). The effect of stirring rate on semisolid stirring brazing of SiCp/A356 composites in air. Materials & Design, 34, 452–458. [CrossRef] [Google Scholar]
  8. Islam, M., Bhowmik, A., Haidar, S., & Biswas, S. (2022). Machining Performance of Nano SiC and Graphite Powder mixed Aluminum Matrix Composites fabricated by Powder Metallurgy using EDM. Materials today: Proceedings [Google Scholar]
  9. Reddy, P.S., Kesavan, R., & Ramnath, B.V. (2018). Investigation of mechanical properties of aluminium 6061-silicon carbide, boron carbide metal matrix composite. Silicon, 10(2), 495–502. [CrossRef] [Google Scholar]
  10. Bandhu, D., Thakur, A., Purohit, R., Verma, R.K., & Abhishek, K. (2018). Characterization & evaluation of Al7075 MMCs reinforced with ceramic particulates and influence of age hardening on their tensile behavior. Journal of Mechanical Science and technology, 32, 3123–3128. [CrossRef] [Google Scholar]
  11. Bindumadhavan, P.N., Chia, T.K., Chandrasekaran, M., Wah, H.K., Lam, L.N., & Prabhakar, O. (2001). Effect of particle-porosity clusters on tribological behavior of cast aluminum alloy A356-SiCp metal matrix composites. Materials Science and Engineering: A, 315(1-2), 217–226. [CrossRef] [Google Scholar]
  12. Amirkhanlou, S., & Niroumand, B. (2011). Effects of reinforcement distribution on low and high temperature tensile properties of Al356/SiCp cast composites produced by a novel reinforcement dispersion technique. Materials Science and Engineering: A, 528(24), 7186–7195. [CrossRef] [Google Scholar]
  13. Bhardwaj, A.R., Vaidya, A.M., Meshram, P.D., & Bandhu, D. (2023). Machining behavior investigation of aluminium metal matrix composite reinforced with tiC particulates. International Journal on Interactive Design and Manufacturing (IJIDeM), 1–15. [Google Scholar]
  14. Dey, D., Chintada, S.K., Bhowmik, A., & Biswas, A. (2020). Evaluation of wear performance of Al2024-SiC ex-situ composites. Materials today: Proceedings, 26(2), 2996–2999. [CrossRef] [Google Scholar]
  15. Rao, R.N., & Das, S. (2011). Effect of SiC content and sliding speed on the wear behaviour of aluminium matrix composites. Materials & Design, 32(2), 1066–1071. [CrossRef] [Google Scholar]
  16. Thimmarayan, R., & Thanigaiyarasu, G. (2010). Effect of particle size, forging and ageing on the mechanical fatigue characteristics of Al6082/SiC p metal matrix composites. The International Journal of Advanced Manufacturing technology, 48(5-8), 625–632. [CrossRef] [Google Scholar]
  17. Bhowmik, A., Dey, D., & Biswas, A. (2021). Impact of tiB2 content and sliding velocity on wear performance of aluminium matrix composites. Journal of Scientific and Industrial Research, 80(7), 600–605. [Google Scholar]
  18. Bandhu, D., Thakur, A., Purohit, R., Verma, R.K., & Abhishek, K. (2018). Characterization & evaluation of Al7075 MMCs reinforced with ceramic particulates and influence of age hardening on their tensile behavior. Journal of Mechanical Science and technology, 32(7), 3123–3128. [CrossRef] [Google Scholar]
  19. Yadav, P.K., & Dixit, G. (2019). Erosive-Corrosive Wear of Aluminium-Silicon Matrix (AA336) and SiCp/tiB2p Ceramic Composites. Silicon, 11, 1649–1660. [CrossRef] [Google Scholar]
  20. Dey, D., Bhowmik, A., & Biswas, A. (2020). Effect of SiC content on mechanical and tribological properties of Al2024-SiC composites. Silicon, 1–11. [Google Scholar]
  21. Bhowmik, A., & Biswas, A. (2021). Wear Resistivity of Al7075/6wT.% SiC Composite by Using Grey-Fuzzy Optimization technique. Silicon, 1–14. [Google Scholar]
  22. Baskaran, S., Anandakrishnan, V., Durai Selvam, M., Raghuraman, S., & Muthaiyaa, V.I. (2014). Taguchi Grey Relational Analysis of Dry Sliding Wear Behaviour of Annealed AA7075-tiC Metal Matrix Composites. Applied Mechanics and Materials, 541, 258–262. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.