Open Access
E3S Web Conf.
Volume 505, 2024
3rd International Conference on Applied Research and Engineering (ICARAE2023)
Article Number 01033
Number of page(s) 9
Section Materials Science
Published online 25 March 2024
  1. Gupta N., Gupta A., Saxena K.K., et al. Mechanical and durability properties of geopolymer concrete composite at varying superplasticizer dosage. Mater today Proc. 2021;44:12–16. [Google Scholar]
  2. Kusiak, A. Smart manufacturing. Int J Prod Res. 2018; [Google Scholar]
  3. Poul Raj I.L., Valanarasu S., Hariprasad K., et al. Enhancement of optoelectronic parameters of Nd-doped ZnO nanowires for photodetector applications. Opt Mater (Amst). 2020;109:110396. [Google Scholar]
  4. Awasthi A., Saxena K.K., Dwivedi R.K. An investigation on classification and characterization of bio materials and additive manufacturing techniques for bioimplants. Mater today Proc. 2021;44:2061–2068. [Google Scholar]
  5. Kalpana G., Kumar P.V., Aljawarneh, S., et al. Shifted Adaption Homomorphism Encryption for Mobile and Cloud Learning. Comput Electr Eng. 2018;65:178–195. [Google Scholar]
  6. Arora, G.S., Gupta, A., & Saxena, K.K. (2024). Evaluation of mechanical, microstructural, tribological characteristics and cytocompatibility in AZ31 hybrid bio-composite reinforced with tiO2-HAp. Results in Surfaces and Interfaces, 14, 100174. [Google Scholar]
  7. Haw J., Sing S.L., Liu Z.H. Digital twins in design for additive manufacturing. Mater today Proc. 2022;70:352–357. [Google Scholar]
  8. Atchudan R., Jebakumar Immanuel Edison, N., Shanmugam, M., et al. Sustainable synthesis of carbon quantum dots from banana peel waste using hydrothermal process for in vivo bioimaging. Phys E Low-dimensional Syst Nanostructures. 2021;126:114417. [Google Scholar]
  9. Chaudhary, N., Dikshit, M.K., Kumar, C.L., Sonia, P., Pathak, V.K., Saxena, K.K., & Salmaan, N.U. (2023). Sustainable mechanical properties evaluation for graphene reinforced Epoxy/Kevlar fiber using MD simulations. Journal of Experimental Nanoscience, 18(1), 2246662. [CrossRef] [Google Scholar]
  10. Pradeep K.P.S., Kumar S.S. Design and development of high performance MOS current mode logic (MCML) processor for fast and power efficient computing. Cluster CompuT. 2019;22:13387–13395. [Google Scholar]
  11. Saxena K.K., Awasthi A. Novel Additive Manufacturing Processes and techniques in Industry 4.0. 2020. [Google Scholar]
  12. Aphirakmethawong J., Yang E., Mehnen J. An Overview of Artificial Intelligence in Product Design for Smart Manufacturing. 2022 27th Int Conf Autom Comput Smart Syst Manuf ICAC 2022. 2022; [Google Scholar]
  13. Chandrappa V., Basavapoornima C., Kesavulu C.R., et al. Spectral studies of Dy3+:zincphosphate glasses for white light source emission applications: A comparative study. J Non Cryst Solids [Internet]. 2022 [cited 2023 Apr 23];583:121466. Available from: [CrossRef] [Google Scholar]
  14. Bonfante M.C., Raspini J.P., Fernandes I.B., et al. Achieving Sustainable Development Goals in rare earth magnets production: A review on state of the art and SWOt analysis. Renew Sustain Energy Rev. 2021;137:110616. [Google Scholar]
  15. Singh, L., Yahya, M.M., Singh, B., Sehgal, S., Saxena, K.K., & Mohammed, K.A. (2023). Investigation of the Effects of Overlapping Passes on Friction Stir Processed Aluminum Alloy 5083. Metal Science and Heat treatment, 1–5. [Google Scholar]
  16. Paul, A., Kesharvani, S., Agrawal, A., Dwivedi, G., Singh, V., & Saxena, K.K. (2023). Mechanical and tribological properties of nano clay/PMMA composites extruded with a twin-screw extruder. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231215224. [Google Scholar]
  17. Basanth Kumar K., Saxena K.K., Dey S.R., et al. Peak stress studies of hot compressed tiHy 600 alloy. Mater today Proc. 2017;4:7365–7374. [Google Scholar]
  18. Jaffery H.A., Sabri M.F.M., Said S.M., et al. Electrochemical corrosion behavior of Sn-0.7Cu solder alloy with the addition of bismuth and iron. J Alloys Compd. 2019;810:151925. [Google Scholar]
  19. Zheng P., Hong Lim K.Y. Product family design and optimization: A digital twin-enhanced approach. Procedia CIRP. 2020;93:246–250. [Google Scholar]
  20. Gaha R., Durupt A., Eynard B. Towards the implementation of the Digital twin in CMM inspection process: Opportunities, challenges and proposals. Procedia Manuf. 2020;54:216–221. [Google Scholar]
  21. Gupta A., Kundalkar D., Saxena K.K. Investigation on deformation of Inconel alloy 751. Mater today Proc. 2021; [Google Scholar]
  22. Yadav S., Yamasani P., Kumar S. Experimental studies on a micro power generator using thermo-electric modules mounted on a micro-combustor. Energy Convers Manag. 2015;99:1–7. [Google Scholar]
  23. Gupta, T.K., Budarapu, P.R., Chappidi, S.R., Yb, S.S., Paggi, M., & Bordas, S.P. (2019). Advances in carbon based nanomaterials for bio-medical applications. Current Medicinal Chemistry, 26(38), 6851–6877. [CrossRef] [PubMed] [Google Scholar]
  24. Lenz J., MacDonald E., Harik R., et al. Optimizing smart manufacturing systems by extending the smart products paradigm to the beginning of life. J Manuf SysT. 2020;57:274–286. [Google Scholar]
  25. Tischner U., Hora M. Sustainable electronic product design. Waste Electr Electron Equip Handb. 2012;405–441. [Google Scholar]
  26. Saxena, K.K., Suresh, K.S., Kulkarni, R.V., Krishna, K.M., Pancholi, V., & Srivastava, D. (2018). Hot deformation behavior of Zr-1Nb alloy in two-phase region-microstructure and mechanical properties. Journal of Alloys and Compounds, 741, 281–292. [Google Scholar]
  27. Yue L., Jayapal M., Cheng X., et al. Highly dispersed ultra-small nano Sn-SnSb nanoparticles anchored on N-doped graphene sheets as high performance anode for sodium ion batteries. Appl Surf Sci. 2020;512:145686. [CrossRef] [Google Scholar]
  28. Awasthi A., Saxena K.K., Arun V. Sustainable and smart metal forming manufacturing process. Mater today Proc. 2021;44:2069–2079. [Google Scholar]
  29. Davis J., Edgar, T., Porter, J., et al. Smart manufacturing, manufacturing intelligence and demand-dynamic performance. Comput Chem Eng. 2012; [Google Scholar]
  30. Francisco K., Swanson D. The Supply Chain Has No Clothes: technology Adoption of Blockchain for Supply Chain transparency. Logistics. 2018; [Google Scholar]
  31. Kharat, V.J., Singh, P., Raju, G.S., Yadav, D.K., Gupta, M.S., Arun, V., & Singh, N. (2023). Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Materials today: Proceedings. [Google Scholar]
  32. Hong Z., Wang H., Gong Y. Green product design considering functional-product reference. Int J Prod Econ. 2019;210:155–168. [Google Scholar]
  33. Zhong R.Y., Xu X., Klotz E., et al. Intelligent Manufacturing in the Context of Industry 4.0: A Review. Engineering. 2017; [Google Scholar]
  34. Arun, V., Singh, A.K., Shukla, N.K., & Tripathi, D.K. (2016). Design and performance analysis of SOA-MZI based reversible toffoli and irreversible AND logic gates in a single photonic circuiT. Optical and quantum electronics, 48, 1–15. [CrossRef] [Google Scholar]
  35. Birkel H., Müller J.M. Potentials of industry 4.0 for supply chain management within the triple bottom line of sustainability - A systematic literature review. J. Clean. Prod. Elsevier Ltd; 2021. p. 125612. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.