Open Access
E3S Web Conf.
Volume 505, 2024
3rd International Conference on Applied Research and Engineering (ICARAE2023)
Article Number 03016
Number of page(s) 9
Section Modelling and Numerical Analysis
Published online 25 March 2024
  1. Bouramdane, A. A. (2023). Optimal Water Management Strategies: Paving the Way for Sustainability in Smart Cities. Smart Cities, 6(5), 2849–2882. [CrossRef] [Google Scholar]
  2. Hasan, H. A., Muhamad, M. H., Ji, B., Nazairi, N. A., Jiat, K. W., Sim, S. I. S. W., & Poh, A. F. M. S. (2023). Revolutionizing wastewater treatment with microalgae: Unveiling resource recovery, mechanisms, challenges, and future possibilities. Ecological Engineering, 197, 107117. [Google Scholar]
  3. Baserba, M. G., Sedlak, D., Barnosell, I., Molinos-Senante, M., Schraa, O., Rosso, D., … & Poch, M. (2023). Using Water and Wastewater Decentralization to Enhance the Resiliency and Sustainability of Cities. [Google Scholar]
  4. Varshney, Y., Dubey, D., Kumar, V., Sharma, S., & Singh, S. Enhancing Sustainable Practices through AI- Driven Green Technology. [Google Scholar]
  5. Hayat, P. (2023). Integration of advanced technologies in urban waste management. In Advancements in Urban Environmental Studies: Application of Geospatial Technology and Artificial Intelligence in Urban Studies (pp. 397–418). Cham: Springer International Publishing. [CrossRef] [Google Scholar]
  6. Chen, T., Wang, M., Su, J., Ikram, R. M. A., & Li, J. (2023). Application of Internet of Things (IoT) Technologies in Green Stormwater Infrastructure (GSI): A Bibliometric Review. Sustainability, 15(18), 13317. [Google Scholar]
  7. Apanavičienė, R., & Shahrabani, M. M. N. (2023). Key Factors Affecting Smart Building Integration into Smart City: Technological Aspects. Smart Cities, 6(4), 1832–1857. [CrossRef] [Google Scholar]
  8. Godavarthi, B., Nalajala, P., & Ganapuram, V. (2017 August) Design and implementation of vehicle navigation system in urban environments using internet of things (IoT). In IOP Conference Series: Materials Science and Engineering (Vol. 225, No. 1, p. 012262). IOP Publishing. [CrossRef] [Google Scholar]
  9. Kumari, C. U., Murthy, A. S. D., Prasanna, B. L., Reddy, M. P. P., & Panigrahy, A. K. (2021). An automated detection of heart arrhythmias using machine learning technique: SVM. Materials Today: Proceedings, 45, 1393–1398. [CrossRef] [Google Scholar]
  10. Saxena, K. K., Srivastava, V., & Sharma, K. (2012). Calculation of Fundamental Mechanical Properties of Single Walled Carbon Nanotube using Non-local Elasticity. Advanced Materials Research, 383, 3840–3844. [Google Scholar]
  11. Tripathi, G. P., Agarwal, S., Awasthi, A., & Arun, V. (2022 August) Artificial Hip Prostheses Design and Its Evaluation by Using Ansys Under Static Loading Condition. In Biennial International Conference on Future Learning Aspects of Mechanical Engineering (pp. 815–828). Singapore: Springer Nature Singapore. [Google Scholar]
  12. Basavapoornima, C., Kesavulu, C. R., Maheswari, T., Pecharapa, W., Depuru, S. R., & Jayasankar, C. K. (2020). Spectral characteristics of Pr3+-doped lead based phosphate glasses for optical display device applications. Journal of Luminescence, 228, 117585. [CrossRef] [Google Scholar]
  13. Reddy, K. S. P., Roopa, Y. M., Ln, K. R., & Nandan, N. S. (2020 July) IoT based smart agriculture using machine learning. In 2020 Second international conference on inventive research in computing applications (ICIRCA) (pp. 130–134). IEEE [Google Scholar]
  14. Agrawal, R., Singh, S., Saxena, K. K., & Buddhi, D. (2023). A role of biomaterials in tissue engineering and drug encapsulation. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221150740. [Google Scholar]
  15. Arun, V., Shukla, N. K., Singh, A. K., & Upadhyay, K. K. (2015 September) Design of all optical line selector based on SOA for data communication. In Proceedings of the Sixth International Conference on Computer and Communication Technology 2015 (pp. 281–285). [Google Scholar]
  16. SudhirSastry, Y. B., Krishna, Y., & Budarapu, P. R. (2015). Parametric studies on buckling of thin walled channel beams. Computational Materials Science, 96, 416–424. [Google Scholar]
  17. Ramadugu, S., Ledella, S. R. K., Gaduturi, J. N. J., Pinninti, R. R., Sriram, V., & Saxena, K. K. (2023). Environmental life cycle assessment of an automobile component fabricated by additive and conventional manufacturing. International Journal on Interactive Design and Manufacturing (IJIDeM), 1–12. [Google Scholar]
  18. Ajith, J. B., Manimegalai, R., & Ilayaraja, V. (2020 February) An IoT based smart water quality monitoring system using cloud. In 2020 International conference on emerging trends in information technology and engineering (ic-ETITE) (pp. 1–7). IEEE. [Google Scholar]
  19. Akter, A. (2023). Rainwater Harvesting for Potable Water Supply: Opportunities and Challenges. [Google Scholar]
  20. Wilderer, P. A., & Paris, S. (2007). Membrane technology revolutionizes water treatment. Water science and technology, 55(7), 11–20. [Google Scholar]
  21. Alagirisamy, B. (2021). Greywater Recycling and Utilization. AgroScience Today, 2(2), 66–72. [Google Scholar]
  22. Swapna Sri, M. N., Anusha, P., Madhav, V. V., Saxena, K. K., Chaitanya, C. S., Haranath, R., & Singh, B. (2023). Influence of Cu particulates on a356mmc using frequency response function and damping ratio. Advances in Materials and Processing Technologies, 1–9. [CrossRef] [Google Scholar]
  23. Ray, S. S., Verma, R. K., Singh, A., Ganesapillai, M., & Kwon, Y. N. (2023). A holistic review on how artificial intelligence has redefined water treatment and seawater desalination processes. Desalination, 546, 116221. [CrossRef] [Google Scholar]
  24. Saxena, K. K., & Lal, A. (2012). Comparative Molecular Dynamics simulation study of mechanical properties of carbon nanotubes with number of stone-wales and vacancy defects. Procedia Engineering, 38, 2347–2355. [CrossRef] [Google Scholar]
  25. Telagam, N., Kandasamy, N., & Nanjundan, M. (2017). Smart sensor network based high quality air pollution monitoring system using labview. International Journal of Online Engineering (iJOE), 13(08), 79–87. [CrossRef] [Google Scholar]
  26. Arora, G. S., & Saxena, K. K. (2023). A review study on the influence of hybridization on mechanical behaviour of hybrid Mg matrix composites through powder metallurgy. Materials Today: Proceedings. [Google Scholar]
  27. Snodgrass, R. F. (2009). Greywater-The Reuse of Household Water: A Small Step Toward Sustainable Living and Adaptation to Climate Change. Geo. Int'l Envtl. L. Rev., 22, 591. [Google Scholar]
  28. Dewalkar, S. V., & Shastri, S. S. (2020). Environmental and economic assessment of proposed on-site wastewater management system in multi-storey residential building. Water Science and technology, 82(12), 3003–3016. [Google Scholar]
  29. Awasthi, A., Saxena, K. K., & Arun, V. (2020). Sustainability and survivability in manufacturing sector. In Modern Manufacturing Processes (pp. 205–219). Woodhead Publishing. [Google Scholar]
  30. Balguri, P. K., Samuel, D. H., & Thumu, U. (2021). A review on mechanical properties of epoxy nanocomposites. Materials Today: Proceedings, 44, 346–355. [Google Scholar]
  31. Korpi, A. G., Țălu, Ş., Bramowicz, M., Arman, A., Kulesza, S., Pszczolkowski, B., … & Gopikishan, S. (2019). Minkowski functional characterization and fractal analysis of surfaces of titanium nitride films. Materials Research Express, 6(8), 086463. [Google Scholar]
  32. Singh, B., Saxena, K. K., Dagwa, I. M., Singhal, P., & Malik, V. (2023). Optimization Of Machining Characteristics of Titanium-Based Biomaterials: Approach to Optimize Surface Integrity for Implants Applications. Surface Review and Letters, 2340008. [Google Scholar]
  33. Arun, V., Singh, A. K., Shukla, N. K., & Tripathi, D. K. (2016). Design and performance analysis of SOA- MZI based reversible toffoli and irreversible AND logic gates in a single photonic circuit. Optical and quantum electronics, 48, 1–15. [CrossRef] [Google Scholar]
  34. Manikandan, S., Subbaiya, R., Saravanan, M., Ponraj, M., Selvam, M., & Pugazhendhi, A. (2022). A critical review of advanced nanotechnology and hybrid membrane based water recycling, reuse, and wastewater treatment processes. Chemosphere, 289, 132867. [Google Scholar]
  35. Hegab, H. M., ElMekawy, A., van den Akker, B., Ginic-Markovic, M., Saint, C., Newcombe, G., & Pant, D. (2018). Innovative graphene microbial platforms for domestic wastewater treatment. Reviews in Environmental Science and Bio/Technology, 17, 147–158. [Google Scholar]
  36. Gupta, T. K., Budarapu, P. R., Chappidi, S. R., Yb, S. S., Paggi, M., & Bordas, S. P. (2019). Advances in carbon based nanomaterials for bio-medical applications. Current Medicinal Chemistry, 26(38), 6851–6877. [CrossRef] [PubMed] [Google Scholar]
  37. Awasthi, A., Saxena, K. K., Dwivedi, R. K., Buddhi, D., & Mohammed, K. A. (2022). Design and analysis of ECAP Processing for Al6061 Alloy: a microstructure and mechanical property study. International Journal on Interactive Design and Manufacturing (IJIDeM), 1–13. [Google Scholar]
  38. Awasthi, A., Saxena, K. K., & Arun, V. (2021). Sustainable and smart metal forming manufacturing process. Materials Today: Proceedings, 44, 2069–2079. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.