| Issue |
E3S Web Conf.
Volume 22, 2017
International Conference on Advances in Energy Systems and Environmental Engineering (ASEE17)
|
|
|---|---|---|
| Article Number | 00058 | |
| Number of page(s) | 9 | |
| DOI | https://doi.org/10.1051/e3sconf/20172200058 | |
| Published online | 07 November 2017 | |
Pretreatment methods as a means of boosting methane production from sewage sludge and its mixtures with grease trap sludge
Czestochowa University of Technology, Institute of Environmental Engineering, ul. Brzeznicka 60 A, Czestochowa, Poland
* Corresponding author: agrosser@is.pcz.czest.pl
The main objective of this study was to determine the applicability of the selected pretreatment methods as a means of intensification of methane production from sewage sludge as well as its mixtures with grease trap sludge. The addition of the fat rich material to the digester treating sewage sludge resulted in an increased methane yield as well as volatile solids (VS) removal of up to 36% (from 134.75 mL/g VS to 182.84 mL/g VS). Furthermore, thermochemical pretreatment of the co-digestion mixture resulted in an approximately 76% higher methane yield as compared to the untreated sewage sludge. The energy balance showed that, for both materials ultrasonic pretreatment and thermochemical pretreatment has an energy self-sufficiency. All of the tested models fit the experimental data with coefficients of determination higher than 0.96.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.