Issue |
E3S Web Conf.
Volume 41, 2018
IIIrd International Innovative Mining Symposium
|
|
---|---|---|
Article Number | 01011 | |
Number of page(s) | 7 | |
Section | Environment Saving Mining Technologies | |
DOI | https://doi.org/10.1051/e3sconf/20184101011 | |
Published online | 26 June 2018 |
Determination of the Separation Densities to Achieve the Greatest Yield of the Concentrate of Hard-Cleaning Coals
T.F. Gorbachev Kuzbass State Technical University, Department of mineral resources processing,
650000 Kemerovo,
28 Vesennya st.,
Russian Federation
* Corresponding author: uvi@kuzstu.ru
A variant of application of Reinhardt's theorem for determination of separation densities at which it is possible to obtain the maximum ultimate yield of gravity concentrate with a particle size of 0.5-100 mm at a given ash content obtained from hard-cleaning coals of two machine classes 13-100 and 0.5-13 mm is considered. The separation densities are found using the washability curves built in Microsoft Excel. The results of the theoretical and practical balances calculated for the found separation densities are compared. It has been established that for hard-cleaning coals in the practical balance, it is not always possible to obtain the ash content of the ultimate concentrate specified in the theoretical balance even with a decrease in the separation densities to a minimum value.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.