| Issue |
E3S Web Conf.
Volume 53, 2018
2018 3rd International Conference on Advances in Energy and Environment Research (ICAEER 2018)
|
|
|---|---|---|
| Article Number | 03067 | |
| Number of page(s) | 5 | |
| Section | Environment Engineering, Environmental Safety and Detection | |
| DOI | https://doi.org/10.1051/e3sconf/20185303067 | |
| Published online | 14 September 2018 | |
Experimental Study on Rock Mechanics Parameters-A Case of the Sand Conglomerate Reservoir in M2 Well Area
1
Research Institute of Petroleum Engineering of PetroChina Xinjiang Oilfield Company, Karamay, 834000
2
Southwest Petroleum University, school of oil and gas engineering, Chendu, 610500
3
PetroChina Tarim Oilfield Company, Oil and Gas Engineering Research Institute, Korla, 841000
Corresponding author: Zhao Chaoneng, 201711000105@stu.swpu.edu.cn
This paper presents the acoustic characteristics tested on 20 groups of cores (20 vertical samples and 60 horizontal samples) from the sand conglomerate reservoir in Baikouquan and lower Wuerhe Formation (two wells in the M2 well area). The average values of dynamic modulus of elasticity and Poisson's ratio of rocks from Baikouquan Formation are 32.1 GPa and 0.2055 respectively, and those of lower Wuerhe Formation are 28.4 GPa and 0.2425 respectively. The three axis rock mechanics test device is used to test the stress-strain curves of the corresponding rock samples. The sand-conglomerate samples in this area generally have good brittleness characteristics; the static modulus of elasticity and Poisson's ratio of the corresponding rock samples are 13.7GPa and 0.2858 respectively, and those of rocks from lower Wuerhe Formation are 14.9GPa and 0.2565, respectively. In general, there is a good correlation between P&S wave velocity, and poor correlation in the dynamic and static mechanical parameters.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.