| Issue |
E3S Web Conf.
Volume 53, 2018
2018 3rd International Conference on Advances in Energy and Environment Research (ICAEER 2018)
|
|
|---|---|---|
| Article Number | 04021 | |
| Number of page(s) | 5 | |
| Section | Environmental Protection, Pollution and Treatment | |
| DOI | https://doi.org/10.1051/e3sconf/20185304021 | |
| Published online | 14 September 2018 | |
Experimental Study on Improvement of Marine Soft Soil with Alkali Residue
Lianyungang Technical College, Department of Architectural Engineering, 222006, Jiangsu, China
* Corresponding author: Shao Yong, Ph.D., Associate Professor. Mainly engaged in teaching and research work in geotechnical engineering. Email:silinfe@sina.com
Industrial alkali slag is the discharge waste in the process of alkali production. About one million tons of alkali slag is discharged in China in one year. It is a burden on the environment, whether it is directly stacked or discharged into the sea. If we can realize the use of resources, it is a multi-pronged move, so alkali slag is used to improve solidified marine soft soil in this paper. The test results show that the alkali residue can effectively improve the engineering properties of marine soft soil. Among them, the unconfined compressive strength and compressive modulus are increased by about 10 times, and the void ratio and plasticity index can all reach the level of general clay. It shows that alkali slag has the potential to improve marine soft soil and can be popularized in engineering.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.