| Issue |
E3S Web Conf.
Volume 63, 2018
Seminary on Geomatics, Civil and Environmental Engineering (2018 BGC)
|
|
|---|---|---|
| Article Number | 00010 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/e3sconf/20186300010 | |
| Published online | 14 November 2018 | |
Reconstruction of an architectural object. Case study: Citadel fort No. 33 “Krakus” in Krakow
1
University of Agriculture in Krakow, Faculty of Environmental Engineering and Land Surveying, Poland
2
Graduate of the University of Agriculture in Krakow, Poland
* e-mail: rmpiech@cyf-kr.edu.pl
The aim of the study was to recreate, in the form of a 3D model, the Citadel fort No. 33 “Krakus” in Krakow. The data on the basis of which the three-dimensional model was made were obtained using a Leica ScanStation P40 terrestrial laser scanner, which is owned by the Faculty of Environmental Engineering and Geodesy of the University of Agriculture Hugona Kollataj in Krakow. The scope of field work included performing laser measurements, and then processing the point cloud in the Leica Cyclone 3D program and creating a full architectural model in SketchUp 2016.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.