| Issue |
E3S Web Conf.
Volume 65, 2018
International Conference on Civil and Environmental Engineering (ICCEE 2018)
|
|
|---|---|---|
| Article Number | 05019 | |
| Number of page(s) | 9 | |
| Section | Environmental Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/20186505019 | |
| Published online | 26 November 2018 | |
Strategic Noise Mapping Prediction for a Rubber Manufacturing Factory in Malaysia
Lee Kong Chian Faculty of Engineering and Science, Universiti Tunku Abdul Rahman, Jalan Sungai Long, Bandar Sungai Long, Cheras, 43000 Kajang, Selangor, Malaysia.
* Corresponding author: limmh@utar.edu.my
Rubber product manufacturing industry was found with severe occupational noise exposure problems due to improper noise management and lack of reliable noise information at the workplace. Strategic noise mapping provides important information in monitoring the occupational noise. Therefore, a case study was conducted to investigate the current noise exposure circumstances based on the information from the noise map and noise risk zones. The stochastic noise mapping simulation method was applied to predict these maps. Based on the results, most of the regions in the operation area were bounded with a noise contour level of 80 dBA and some small regions were exceeded the noise level of 100 dBA. More than 45 % of mapping area was categorised as extremely high risk and high risk zones. Workers are exposed to the high noise level in this workplace. The management should take immediate action for controlling noise and always supervise their workers in using the hearing protection equipment.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.