| Issue |
E3S Web Conf.
Volume 67, 2018
The 3rd International Tropical Renewable Energy Conference “Sustainable Development of Tropical Renewable Energy” (i-TREC 2018)
|
|
|---|---|---|
| Article Number | 01029 | |
| Number of page(s) | 5 | |
| Section | Smart Grid and Regulation | |
| DOI | https://doi.org/10.1051/e3sconf/20186701029 | |
| Published online | 26 November 2018 | |
Experimental investigations of ice slurry flow based on monoethylene glycol at high ice fractions
Department of Mechanical Engineering, Universitas Indonesia, Depok 16424, Indonesia
* Coresponding author: yanuar@eng.ui.ac.id
Ice slurry has so many advantages as phase-change slurries due to the high latent heat of its particles. Ice slurry is one of a competitive alternative to conventional secondary refrigeration systems that have been successfully employed in many applications. In this research, ice slurry flow with monoethylene glycol (MEG) at high ice fractions was investigated. The experiment was carried out by measuring shear stress and flow rate as variable to calculate power law index. The experiment was performed in 14 mm, 21 mm, and 24 mm circular tubes, respectively. The Initial concentration of 5 wt%, 7 wt%, and 10 wt% of MEG was investigated. Ice fraction was maintained above 30% in a storage tank. Experimental results of the Darcy friction factor were compared to Poiseuille and Blasius model. The ice slurry flows exhibited a shear-thickening flow (n>1) for all initial concentration in the range 1.07 - 1.58. The Greater initial concentration of MEG tends to give smaller friction compared with another ice slurry flow with smaller initial concentration.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.