Issue |
E3S Web Conf.
Volume 67, 2018
The 3rd International Tropical Renewable Energy Conference “Sustainable Development of Tropical Renewable Energy” (i-TREC 2018)
|
|
---|---|---|
Article Number | 03009 | |
Number of page(s) | 5 | |
Section | Multifunctional and Advanced Materials | |
DOI | https://doi.org/10.1051/e3sconf/20186703009 | |
Published online | 26 November 2018 |
Analysis of chemical volume and composition to overcome liquid loading in gas well
Department of Chemical Engineering, Faculty of Engineering Universitas Indonesia, Kampus Baru UI, Depok 16424 Indonesia
* Coresponding author: wahid@che.ui.ac.id
Many problems often occur in producing natural gas from well. Due to the existence of water content in natural gas or water drive mechanism, liquid (especially water) is also produced from gas well, following natural gas production. When gas critical rate is higher than gas production rate due to reservoir pressure decline, it will cause liquid accumulation in the bottom of well, avoiding natural gas to be well lifted from well bottom to surface. It is liquid loading. Chemical injection of 0.4 liquid that consists of ethoxy sulphate, alkane sulphonate, and petroleum sulphonate is effective to overcome liquid loading in natural gas well thus causing an increase in natural gas production by 57%.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.