| Issue |
E3S Web Conf.
Volume 71, 2018
XVIII Conference of PhD Students and Young Scientists “Interdisciplinary Topics in Mining and Geology”
|
|
|---|---|---|
| Article Number | 00011 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/e3sconf/20187100011 | |
| Published online | 05 December 2018 | |
Cement slurry resistance to chemical aggressiveness of carbon capture and storage (CCS) method
AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, 30 A. Mickiewicz Av., 30-059 Krakow, Poland
* Corresponding author: mformela@agh.edu.pl
Nowadays, scientists from all over the world are focused on environmental issues connected with the greenhouse gases. The carbon dioxide is one of those gases. Therefore, researches are carried out to limit the emission or utilization the already ones. The aim of laboratory research was to find additives and admixtures resistant to CO2 presence and at the same time, able to modify rheological parameters of fresh cement slurry, as it is desirable during cementing of the wellbore. Moreover, research included the effect of newly synthesized polymers on the cement parameters. Laboratory research included filtration of the cement slurry, rheological parameters – Yield point, mechanical properties of hardened cement slurry obtained from hydraulic press and photographs of changes in mineralogical structure of cement from the electron microscope. The research was divided into two parts. The first one was based on the cement mixtures with commonly used superplastifier (SPL). In the second one, the SPL was replaced with newly synthesized polymer.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.