Issue |
E3S Web Conf.
Volume 104, 2019
International Conference “Energy Efficiency and Energy Saving in Technical Systems” (EEESTS-2019)
|
|
---|---|---|
Article Number | 01007 | |
Number of page(s) | 6 | |
Section | Modern Energy Efficient Automation Technology | |
DOI | https://doi.org/10.1051/e3sconf/201910401007 | |
Published online | 21 June 2019 |
Use of low potencial wastewater heat
Don State Technical University, Institute of service and business (branch) of Don State Technical University, 147 Shevchenko, 346500 Shakhty, Russia
* Corresponding author: vadmitrienko@rambler.ru
The article points out that exhaustion of fossil stocks of fuel and negative impacts of fuel burning on environment determined a significant interest in technologies of heat utilization of low-potential sources in many developed countries of the world. Therefore the solution of the problem of using heat utilization technologies of low-potential sources will be of great importance for preserving people's habitats. In Russia, the most promising area of using unconventional energy sources is heat supply systems of houses and buildings. The conducted analysis shows that one of the effective directions of energy saving is heat pump systems of heat supply, using the most available low potential heat source of flooded massif of soil. It is noted that a huge energy potential of water pumped from closed mines is practically unused because of considerable distance of heat consumers from water purification complexes.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.