| Issue |
E3S Web Conf.
Volume 105, 2019
IVth International Innovative Mining Symposium
|
|
|---|---|---|
| Article Number | 01045 | |
| Number of page(s) | 5 | |
| Section | Environment Saving Mining Technologies | |
| DOI | https://doi.org/10.1051/e3sconf/201910501045 | |
| Published online | 21 June 2019 | |
Determination of the Parameters of Geomechanical Stress Undulation Along the Length of a Face
1
T.F. Gorbachev Kuzbass State Technical University, 650000 28 Vesennya st., Kemerovo, Russian
2
Institute of Coal of the Federal Research Centre of Coal and Chemistry Siberian Branch of Russian Academy of Science, 650065, Kemerovo, Russia
3
Ministry of Energy of the Russian Federation, 107996 GSP-6, Moscow, Russia
The use of the mass structuring flowchart will make it possible to forecast the methane release when mining a coal seam, to determine in advance and reasonably areas of increased rock pressure on a coal seam and a powered support. It will allow forecasting the areas of the negative rock pressure effect along the length of a face, increasing coal mining performance due to a more accurate calculation of the load on a stope and the cutting machinery output, correcting the force of the working bodies of cutting machines when destructing a coal seam, selecting face supports according to their bearing capacity, planning measures to eliminate the negative rock pressure effect in these areas, strengthen a selvedge to reduce the visible coal sloughing. Coal mining performance and safety will increase.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.