| Issue |
E3S Web Conf.
Volume 105, 2019
IVth International Innovative Mining Symposium
|
|
|---|---|---|
| Article Number | 03027 | |
| Number of page(s) | 8 | |
| Section | Innovations in Mining Machinery | |
| DOI | https://doi.org/10.1051/e3sconf/201910503027 | |
| Published online | 21 June 2019 | |
Perspective Solutions for the Design of Drilling Tools
1
Vice-Rector for International Relations, Tashkent State Technical University, 100095, Tashkent, Uzbekistan
2
Faculty of Mining and metallurgy, Tashkent State Technical University, 100095, Tashkent, Uzbekistan
* Corresponding author: toshov@tdtu.uz
The article considers the ways to solve optimization problems of drill bits on a deterministic basis through studying and using the “Regularity of energy consumption of dynamic systems from resistance to motion forces”, which directly indicates the causes of bit balling formation, the reasons for the insufficient stability of the bearing assemblies of the cones, the causes of instability of the drill bits at the bottom of the well. Theoretical grounded search was done to use certain methods for designing drill bits of cutting-abrasive type, working in the rotational steam mode, which determine uniform wear of armaments for all crowns of working matrices and uniform destruction of the rock through all of the annular bottom hole.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.