Issue |
E3S Web Conf.
Volume 109, 2019
International Conference Essays of Mining Science and Practice
|
|
---|---|---|
Article Number | 00010 | |
Number of page(s) | 10 | |
DOI | https://doi.org/10.1051/e3sconf/201910900010 | |
Published online | 09 July 2019 |
Reduction of technogenic load from sludge collectors due to separation and dehydration of the stored material
Institute of Geotechnical Mechanics named by N. Poljakov of National Academy of Sciences of Ukraine, 49005, Dnipro, Simferopolska Str., 2a, Ukraine
* Corresponding author: bubnova@nas.gov.ua
Purpose: the identification of geomechanical problems of mining industry wastes accumulation and substantiation of the ways for their solution with the possibility of processing the watery technogenic feedstock. It has been shown that in order to reduce the technogenic load, it is necessary to reduce the area of land under the waste ponds and the accumulated volumes themselves of mining and enrichment wastes. It has been revealed that the mineral stock, formed from wide grain-size classes with a high content of particles less than 0.2 mm, is dewatered up to 18 – 22 % by traditional methods and is practically not classified. A mathematical model has been proposed of screening and dewatering kinetics, which takes into account comprehensively the initial distribution of particles and liquid throughout the height of the screened material layer, segregation, mixing, sifting, vibrational transportation features and change in the height of the layer. The use of technology will allow: increase the economic efficiency of enterprises; to expand the feedstock base for construction, coke and chemical industries and power industry; to solve the problems of creating additional containers for storing the wastes; to improve significantly the environmental situation in the mining and processing regions.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.