Issue |
E3S Web Conf.
Volume 111, 2019
CLIMA 2019 Congress
|
|
---|---|---|
Article Number | 02054 | |
Number of page(s) | 5 | |
Section | Indoor Environment Quality and Others | |
DOI | https://doi.org/10.1051/e3sconf/201911102054 | |
Published online | 13 August 2019 |
Indoor environmental quality evaluation in NZEB
1 Slovak University of Technology in Bratislava, Radlinksého 11, 810 05, Bratislava
2 University of Applied Sciences, FH Burgenland, Steinamangerstraße 21 A-7423 Pinkafeld
* Corresponding author: imrich.sanka@gmail.com
The European Commission in 2010 accepted Energy Performance of Buildings Directive (EPBD) and the 2012 Energy Efficiency Directive (EED) are the main energy conservation legislative instruments for to reduce the energy consumption of new built and renovated buildings in Europe. The national regulation based on EPBD states that after the year 2016 only so called ultra-low energy buildings can be built. The next tightening in energy saving will come after 2021 (for commercial buildings after 2019), when only nearly zero energy buildings (NZEB) would be allowed to build. It means that these buildings must fulfil A0 category requirements by energy labelling.
But what about the indoor environmental quality in objects like this? This article shows results of indoor environmental quality measurement in NZEB building. Indoor air temperature, relative humidity, carbon dioxide concentration and air exchange rate had been measured. Except these parameters energy consumption from the grid and from the photovoltaic panel had been evaluated.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.