| Issue |
E3S Web Conf.
Volume 113, 2019
SUPEHR19 SUstainable PolyEnergy generation and HaRvesting Volume 1
|
|
|---|---|---|
| Article Number | 03016 | |
| Number of page(s) | 8 | |
| Section | Energy Micropolygeneration and Harvesting | |
| DOI | https://doi.org/10.1051/e3sconf/201911303016 | |
| Published online | 21 August 2019 | |
Performance Assessment of Bladeless Micro-Expanders Using 3D Numerical Simulation
1
Thermochemical Power Group (TPG), University of Genoa, Italy
2
SIT Technologies, Italy
* Corresponding author: avinash.renuke@edu.unige.it
This paper summarizes the development of fully 3D Computational Fluid Dynamics (CFD) analysis for bladeless air micro expander for 200 W and 3 kW rated power. Modelling of nozzle along with rotor is done using structured mesh. This analysis, for the first time, demonstrates the interaction between nozzle and rotor using compressible flow density-based solver. The Shear Stress Transport (SST) turbulence model is employed to resolve wall effects on the rotor and to determine the shear stress accurately. The results illustrate the flow field inside stator and rotor along with complicated mixing zone between stator and rotor. The comparison of rotor-stator CFD simulation results is done with experiments to preliminary validate the model. The losses in the turbine are discussed with the help of experimental and numerical data.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.