| Issue |
E3S Web Conf.
Volume 118, 2019
2019 4th International Conference on Advances in Energy and Environment Research (ICAEER 2019)
|
|
|---|---|---|
| Article Number | 02069 | |
| Number of page(s) | 4 | |
| Section | Energy Equipment and Application | |
| DOI | https://doi.org/10.1051/e3sconf/201911802069 | |
| Published online | 04 October 2019 | |
Ameliorated mean adaptive median filtering algorithm
College of Electrical and Electronic Engineering, Chongqing University of Technology, Chongqing 400054, China
* Corresponding author: Yongping Wang ypwang0001@126.com
Aiming at the problem that the quality of infrared image decreases due to the large amount of random noise in the process of collection and transmission of infrared image of electrical equipment, and the accuracy of automatic detection of electrical equipment decreases, based on the traditional adaptive median filter algorithm, the adaptive median filter is analyzed, which can filter only the salt and pepper noise below 25%. An improved mean adaptive median filtering algorithm is proposed to overcome the shortcomings of wave effect. Firstly, the filtering window is selected according to the decision setting condition, and then it is judged whether the K-mean value near the center point is a noise point, and if so, the window is increased, otherwise the average value is output. Finally, it is judged whether the value of the current pixel point is noise, and if so, the average value is output, otherwise, the current pixel value is output. The experimental results show that the algorithm can effectively filter salt and pepper noise and Gauss noise, while maintaining the image sharpness, and has good filtering performance on PSNR and MSE indicators.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.