Particle Size Distribution Based Occurrence Features of Organic Components in Printing and Dyeing Wastewater Under a Treatment Process

¹ National Engineering Research Center of Protected Agriculture, Tongji University, Shanghai 200092, China
² State Key Laboratory of Pollution Control and Resource Reuse, Tongji University, Shanghai 200092, China
³ China Rural Technology Development Center, Beijing 100032, China

^* Corresponding author: 78shenzheng@tongji.edu.cn

Abstract

A more detailed occurrence features of organic matters in the printing and dyeing wastewater, based on its particle size distribution (PSD) and along with a wastewater treatment process, was conducted to provide a support for advanced treatment. Results suggested that, (1) In the dyeing wastewater, the occurrence characteristic of COD was: soluble>supra colloidal>colloidal>settleable; However, for protein, the supra colloidal was dominant, followed by the soluble. The feature of the polysaccharide was consistent with COD’s. In the wastewater, 29.66% of COD could be attributed to proteins and 3.45% of the COD could be attributed to polysaccharides. (2) The relationship among the forms of COD in the primary sedimentation tank, aerobic tank, secondary sedimentation tank, and reverse osmosis-treated concentrated effluent was consistent, that was: soluble>colloidal>supra colloidal>settleable. (3) In the primary sedimentation tank, the settleable COD was almost completely removed; In the aerobic tank, the residual super colloidal COD was not much; After MBR-RO treatment, the COD in the reverse osmosis concentrated water was almost dissolved and only a little presented in other forms.