| Issue |
E3S Web Conf.
Volume 121, 2019
I International Conference “Corrosion in the Oil and Gas Industry”
|
|
|---|---|---|
| Article Number | 04013 | |
| Number of page(s) | 4 | |
| Section | Materials Selection & Design | |
| DOI | https://doi.org/10.1051/e3sconf/201912104013 | |
| Published online | 14 October 2019 | |
EXPERIENCE IN THE DEVELOPMENT AND USE OF ALUMINUM ALLOY CASING FOR CONDITIONS OF HIGH CONTENT OF ACID GASES IN FORMATION FLUIDS
1
Gubkin Russian State University of Oil and Gas (National Research University), 65 Leninsky Prospekt, Moscow 119991, Russia
2
OOO “Aquatic-BT”, 4/10, Stepana Supruna, Moscow 125167 Russia
When selecting a casing material for fields with a high content of H2S and CO2, it is recommended to use specialized corrosion-resistant tubulars with high content of chrome of the Sanicro 29 type. The high cost of the material can be critical for the project economy. A promising approach for these problems elimination could be the application of aluminium alloy casing pipes. They are remain inert to corrosion even if the formation environment is fully saturated with H2S and/or CO2. They are also lightweight, have high strength-to-weight ratio, and thus decrease the existing tensions in the string and reduce well construction costs.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.