Issue |
E3S Web Conf.
Volume 121, 2019
I International Conference “Corrosion in the Oil and Gas Industry”
|
|
---|---|---|
Article Number | 04016 | |
Number of page(s) | 4 | |
Section | Materials Selection & Design | |
DOI | https://doi.org/10.1051/e3sconf/201912104016 | |
Published online | 14 October 2019 |
Perspective ways to improve the strength properties and resistance to hydrogen induced cracking of low-alloy pipe steels
1
I.P. Bardin Central Research Institute for Ferrous Metallurgy, 105005 Moscow, Russia
2
Association of Pipe Manufacturers, 115088 Moscow, Russia
3
Center for Examination of Pipeline Systems and Engineering, 127051 Moscow, Russia
* Corresponding author: kholodnyi.aa@gmail.com
The perspective ways to improve the strength properties and resistance to hydrogen induced cracking (HIC) of low-alloy pipe steels were established. The possibility to improve the strength properties and resistance to HIC of plates due the additive of 0.15% molybdenum while decreasing finish temperature of accelerated cooling from 560 to 420°C was found. The influence of heating in the α-, (α+γ)and γ-regions followed by air cooling on the mechanical properties and resistance to HIC of various alloying systems pipe steels plates was studied. The possibility of increasing the strength while maintaining the resistance to HIC of plates by tempering at heating in the α-region was shown.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.