Issue |
E3S Web Conf.
Volume 135, 2019
Innovative Technologies in Environmental Science and Education (ITESE-2019)
|
|
---|---|---|
Article Number | 02014 | |
Number of page(s) | 8 | |
Section | Energy Efficiency in the Transport Sector | |
DOI | https://doi.org/10.1051/e3sconf/201913502014 | |
Published online | 04 December 2019 |
Construction building systems protection under emergency exposure
1
Kursk State University, 33, Radishcheva st., 305000, Kursk, Russia
2
Moscow State University of Civil Engineering, 26, Yaroslavskoye Shosse, 129337, Moscow, Russia
3
Research Institute of Building Physics of the Russian Academy of Architecture and Building Sciences (NIISF RAASN), Lokomotivny Ave., 21, 127238, Moscow, Russia
* Corresponding author: kkuzzina@mail.ru
The structural reliability of the building ensures the building safety as a whole and the safety of the population, therefore the issue of ensuring reliability arises primarily in the design process. Buildings must be protected from destruction during all types of force, as well as in the case of load-bearing structures destruction as a result of emergency. Emergency impact on an object is an unregulated impact that is created as a result of an object getting into a special situation and can lead to its accident. The causes of structures progressive collapse are considered in this article. The main methods and methods of protecting buildings from progressive destruction are given. The calculation analysis of the monolithic reinforced concrete building frame for progressive collapse according to the method of possible damage is performed. There are many calculated and constructive proposals for solving the problems of counteracting the progressive destruction that can be divided into three categories: secondary protection measures, indirect design and direct design. In this article the resulting reinforcement of structural elements is determined taking into account the structural requirements for the continuity of longitudinal reinforcement, the minimum percentage of reinforcement. They are determined in the necessary places of additional reinforcement depending on the accepted permanent (background) reinforcement of the floors.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.