| Issue |
E3S Web Conf.
Volume 135, 2019
Innovative Technologies in Environmental Science and Education (ITESE-2019)
|
|
|---|---|---|
| Article Number | 03057 | |
| Number of page(s) | 8 | |
| Section | Green Architecture and Sustainable Urban Design | |
| DOI | https://doi.org/10.1051/e3sconf/201913503057 | |
| Published online | 04 December 2019 | |
Power and energy characteristics of concrete
1
Nosov Magnitogorsk State Technical University, Department the design of structures, 455000, 38, Lenin Street, Magnitogorsk, Russia
2
Moscow State (National Research) University of civil Engineering, 129337, 26, Yaroslavskoye Shosse, Moscow, Russia
* Corresponding author: loza_mgn@mail.ru
A new installation for testing concrete samples has been developed. The methodology for testing concrete samples with a crack has been clarified. Tested. Strength and energy characteristics of crack resistance of concrete samples are obtained. The results are presented in the form of graphs and tables. The results of experimental studies are compared with the theoretical characteristics of concrete obtained by modeling the behavior of concrete samples by the finite element method. The research results showed the possibility of using the proposed installation and test methodology in further studies.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.