Issue |
E3S Web Conf.
Volume 135, 2019
Innovative Technologies in Environmental Science and Education (ITESE-2019)
|
|
---|---|---|
Article Number | 03067 | |
Number of page(s) | 8 | |
Section | Green Architecture and Sustainable Urban Design | |
DOI | https://doi.org/10.1051/e3sconf/201913503067 | |
Published online | 04 December 2019 |
Calculation of the normal section strength of rubcon beams using deformation diagrams
Voronezh State Technical University, 84, 20 let Oktyabrya st., 394006, Voronezh, Russia
* Corresponding author: alevchenko@vgasu.vrn.ru
Rubber concrete (rubcon) - polymer concrete, which has high strength properties, as well as the constructions made of it. Fibrorubcon – rubber concrete with the addition of disperse reinforcement. On the basis of test results for pure bending, empirical dependencies and prerequisites for adapting existing methods for calculating the strength of normal sections of rubcon and fibrorubcon beams were obtained. These studies allow developing methods for calculating the normal cross sections of bending elements made of rubber concrete using deformation diagrams and taking into account the work of stretched polymer concrete.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.