Issue |
E3S Web Conf.
Volume 136, 2019
2019 International Conference on Building Energy Conservation, Thermal Safety and Environmental Pollution Control (ICBTE 2019)
|
|
---|---|---|
Article Number | 06018 | |
Number of page(s) | 5 | |
Section | Monitoring and Treatment of Water Pollution | |
DOI | https://doi.org/10.1051/e3sconf/201913606018 | |
Published online | 10 December 2019 |
Removal of Low Concentration Phosphate in Phosphogypsum Leachate
School of Resources and Safety Engineering, Central South University, Changsha, Hunan, 410083, China
In order to find a method for removing low-concentration phosphate from phosphogypsum leachate, modified quartz sand was used as adsorbent. The effects of adsorbent dosage, phosphate concentration and adsorption time on phosphate removal efficiency were investigated. The results show that the optimum dosage of modified quartz sand was 0.024g/mL. The effluent phosphate concentration was lower than 0.023g/mL, and the phosphate removal efficiency could reach up to 98%.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.