| Issue |
E3S Web Conf.
Volume 139, 2019
Rudenko International Conference “Methodological problems in reliability study of large energy systems” (RSES 2019)
|
|
|---|---|---|
| Article Number | 01076 | |
| Number of page(s) | 3 | |
| DOI | https://doi.org/10.1051/e3sconf/201913901076 | |
| Published online | 16 December 2019 | |
Development of optimal modes and mathematical models of energy performance of electric steelmaking production
1 Tashkent State Technical University named after Islam Karimov, 100095, Uzbekistan, Tashkent, University St. 2A
2 Karakalpak State University, 230100, Uzbekistan, Nukus, Ch. Abdirov St.1
3 Institute of Energy of the Academy of Sciences of the Republic of Uzbekistan, 700100, Tashkent city, Republic of Uzbekistan
* Corresponding author: ilider1987@yandex.com
The article deals with the issues of determining the optimal modes of electric steelmaking production on the basis of analysis of the graph of changes in the average power and voltage of the arc furnace in one meltdown cycle. In addition, empirical equations for determining the flow rate and specific energy consumption during the operation of process equipment under normal conditions were obtained for the main equipment of the electric arc-furnace shop using the mathematical method.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.