Issue |
E3S Web Conf.
Volume 154, 2020
6th International Conference – Renewable Energy Sources (ICoRES 2019)
|
|
---|---|---|
Article Number | 02002 | |
Number of page(s) | 6 | |
Section | Biofuels | |
DOI | https://doi.org/10.1051/e3sconf/202015402002 | |
Published online | 09 March 2020 |
Production efficiency of Poland farm-scale biogas plants: A case study
1
Poznań University of Life Sciences, Institute of Biosystems Engineering, 60637 Poznań, Poland
2
Poznań University of Life Sciences, Institute of Food Technology of Plant Origin, 60637 Poznań, Poland
* Corresponding author: pilarska@up.poznan.pl
This paper provides the analysis of results of biogas and methane yield for: maize silage (MS), pig slurry (PS), waste potatoes (WP) and sugar beet pulp (SB). The results show that maize silage is the most energy substrate (among the samples tested), providing a cumulative methane yield from 595 to 631 m-3 Mg VS (VS – volatile solids). The study was carried out in a laboratory scale using anaerobic batch reactors, at controlled (mesophilic) temperature and pH conditions. This paper is Part I of a report of an experiment carried out, in the laboratory scale and in the commercial scale (in parallel) The purpose of the experiment was to verify differences in biomethane yields of the same materials in the two scales. Moreover, this paper is an introduction to a presentation of the method to determine the biochemical methane potential correction coefficient (BMPCC), the details of which will be explained in Part II.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.