| Issue |
E3S Web Conf.
Volume 164, 2020
Topical Problems of Green Architecture, Civil and Environmental Engineering 2019 (TPACEE 2019)
|
|
|---|---|---|
| Article Number | 02003 | |
| Number of page(s) | 10 | |
| Section | Energy Efficiency in Building Construction | |
| DOI | https://doi.org/10.1051/e3sconf/202016402003 | |
| Published online | 05 May 2020 | |
Features of compressed rods calculations with account of initial imperfections and creep effects
1 Don State Technical University, Faculty of Civil Engineering, Gagarin 1 Sq., 344000, Rostov-on-Don, Russia
2 Russian State Tourism and Service University, 99 Glavnaya street, Moscow, 141221, Russia
* Corresponding author: chepurnenkoviacheslav@gmail.com
The article presents solutions to the problem of rod buckling, taking into account creep effects. Trigonometric series, the finite difference method in combination with the programming language MATLAB, as well as the finite element method in the ANSYS software package were used in the solutions. The behavior of the rods is researched for two types of relations between strain and stress during creep, with strains in an explicit and implicit form. When solving, the criterion of initial imperfections with their different values is used, as well as the tangential-modular theory. The results obtained for the two creep models are compared. The conclusion is made about the accuracy of the results of calculations in ANSYS with the presence of a combination of geometric and physical nonlinearity for various creep models.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.