| Issue |
E3S Web Conf.
Volume 164, 2020
Topical Problems of Green Architecture, Civil and Environmental Engineering 2019 (TPACEE 2019)
|
|
|---|---|---|
| Article Number | 03028 | |
| Number of page(s) | 11 | |
| Section | Energy Efficiency in Transportation | |
| DOI | https://doi.org/10.1051/e3sconf/202016403028 | |
| Published online | 05 May 2020 | |
Assessment of the concrete part of the contact system supports in the field
Far Eastern State Transport University, Serysheva Street, 47, Khabarovsk, 680021, Russia
* Corresponding author: shtakal@mail.ru
This article describes the issues of historical tour to the development of the supporting facilities fleet on the electrified railways of Russia; it considers the causal relationships of defect formation in reinforced concrete supports of the contact line. For the given operating conditions, a 3D model of the interior bracket-type reinforced concrete support was created in the SolidWorks software package. Using the SolidWorks Simulation module, the engineering review of the reinforced concrete support tension was made using the developed computation algorithm. 3D images of the support model were visualized from operating loads under design conditions and the values of the strain in the support height subject to the exposure to additional factors.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.