Issue |
E3S Web Conf.
Volume 165, 2020
2020 2nd International Conference on Civil Architecture and Energy Science (CAES 2020)
|
|
---|---|---|
Article Number | 01002 | |
Number of page(s) | 3 | |
Section | Energy Engineering and Energy Technology | |
DOI | https://doi.org/10.1051/e3sconf/202016501002 | |
Published online | 01 May 2020 |
Design of intelligent and efficient water and electricity cogeneration equipment
School energy and power engineering, Wuhan university of technology, Wuhan, Hubei, 430063, China
* Corresponding author’s e-mail: 1350612523@qq.com
The solar steam generation system studied in this project is mainly composed of a double-layered structure. The upper layer is a nano-fluid material with a light absorber, and the lower layer is an insulating material with two-dimensional or three-dimensional water transport channels. It is hydrophilic to utilize capillary forces and promote Fluid flows to the hot zone, and interconnected pores are used for fluid inflow and outflow to the structure. The device embeds a semiconductor temperature difference power generation sheet in the lower layer, the upper surface is in contact with the photothermal layer, and the lower surface is in contact with the bulk water. The formation of a temperature difference generates an electromotive force, which makes the energy utilization efficiency higher.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.