| Issue |
E3S Web Conf.
Volume 165, 2020
2020 2nd International Conference on Civil Architecture and Energy Science (CAES 2020)
|
|
|---|---|---|
| Article Number | 01031 | |
| Number of page(s) | 4 | |
| Section | Energy Engineering and Energy Technology | |
| DOI | https://doi.org/10.1051/e3sconf/202016501031 | |
| Published online | 01 May 2020 | |
Numerical Simulation on Flow and Heat Transfer in Pulsating Heat Pipe with Different Models
1 Changchun Institute of Technology, Changchun, Jilin, China
2 Jilin Engineering Research Center for Building Energy Supply and Indoor Environmental Control, Changchun, Jilin, China
* Corresponding author: liujianhong@ccit.edu.cn
Based on Mixture and Euler model, numerical simulation was used to study the flow and heat transfer in pulsating heat pipe by unsteady method. By comparing the gas volume fraction and gas velocity by different models at different time, the results showed that both models could simulate the evaporation and condensation process of the working fluid, and the liquid plug and gas plug were formed in the tube. By comparing the gas volume fraction and gas velocity at 5s and 10s, it was indicated that the fluid dynamics and heat transfer were more violent by Mixture model in the tube.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.