Calculation of tube concrete elements with strengthened cores by numerical method

¹ Kryvyi Rih National University, Department of Industrial, Civil and Urban Construction, Kryvyi Rih, 50027, Ukraine
² Poltava National Technical Yuriy Kondratyuk University, Department of Highways, Geodesy, Land Management and Rural Buildings, Poltava, 36011, Ukraine
³ Lutsk National Technical University, Department of Automobile Roads and Airfields, Lutsk, 43018, Ukraine
⁴ O.M. Beketov National University of Urban Economy in Kharkiv, Department of Urban Construction, Kharkiv, 61002, Ukraine

^* Corresponding author: palyvoda87@ukr.net

Abstract

The paper considers the features of formation of finite element models of tube confined concrete structural elements in the form of centrally compressed rod with strengthened cores. The prerequisites, which underlies the proposed approach to the formation of finite element models of tube confined concrete elements with strengthened cores, are given. Lengthwise the tube confined concrete elements have constant dimensions and a set of cross-sectional components. It is proved that the use of high-strength concrete allows performing calculations in the elastic stage of the work of materials. When modeling the work of rod reinforcement in tube confined concrete elements with strengthened cores, it can be represented as an imaginary cylinder with a cross-sectional area equal to the area of the rod reinforcement. The proposed prerequisites for the numerical simulation of the work of tube confined concrete elements with the strengthened cores of the studied types allowed to construct adequate finite element models. The difference in the value of the load-bearing capacity obtained from the results of physical and numerical experimental studies was 5,94…7,72 %.