| Issue |
E3S Web Conf.
Volume 174, 2020
Vth International Innovative Mining Symposium
|
|
|---|---|---|
| Article Number | 03017 | |
| Number of page(s) | 6 | |
| Section | Innovations in Mining Machinery | |
| DOI | https://doi.org/10.1051/e3sconf/202017403017 | |
| Published online | 18 June 2020 | |
Comparative Analysis of Gearboxes Wear in Excavators and Mining Trucks
1 T.F. Gorbachev Kuzbass State Technical University, Vesennya St. 28, Kemerovo, Russia
2 Kemerovo State Agricultural Institute, Markovtseva St., 5, Kemerovo, Russia
3 Kazakh Humanitarian Juridical Innovative University, EKR, Semey, 11 Mangilik st., Republic of Kazakstan
The primary task of all enterprises in mining industry is to increase the durability and reliability of the mining complex. These very indicators provide nonstop minerals mining, and as a result, productivity increases. Indicators maintaining at high level can be achieved by different ways, but the most effective method is repair-in-place diagnosis of the actual technical condition of the main units and assemblies of equipment, as it is less costly and the most informative. To identify gear malfunctions, the physical and chemical analysis of the used oil is used to determine metallic impurities. A comparative analysis of wear products accumulation in rotary gears of mining excavators and gearboxes of the motor-wheel of dump trucks revealed the similarity of mathematical models for the determination of metallic impurities in used oil. The “universal” mathematical model is given in the paper; it allows to determine the actual technical condition of gearboxes for various equipment with a few assumptions. Moreover, the model takes into account various indicators of the environment, used oil, as well as the operating parameters of the equipment.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.