| Issue |
E3S Web Conf.
Volume 175, 2020
XIII International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness – INTERAGROMASH 2020”
|
|
|---|---|---|
| Article Number | 05002 | |
| Number of page(s) | 6 | |
| Section | Agricultural Machinery | |
| DOI | https://doi.org/10.1051/e3sconf/202017505002 | |
| Published online | 29 June 2020 | |
The dependence of the performance of the process of finishing vibration processing on the shape of the abrasive tool (granules)
Polytechnic Institute (branch) of the Don State Technical University in Taganrog, 109a, Petrovskaya str., 347904, Taganrog, Russia
* Corresponding author: sanadstu@mail.ru
The article presents the results of experimental studies of the influence of polymer abrasive granules shape on the surface roughness formation and metal removal during vibrational finishing and hardening treatment (VFHT). As is known, surface roughness and the amount of metal removal are affected by a number of factors: binder material, material and granularity of the abrasive, technological lubricant-coolant medium (LCM) type, loading mass, initial roughness, etc. Processing was carried out for 120 min on a UVG-4x10 vibrating machine, with a working chamber volume of 10 dm3. Metal removal Q (grams) and surface roughness Ra (μm) were measured using an AD-200 analytical balance and an SJ-210 profilometer. The results presented show that polymer abrasive granules have high cutting ability, the intensity of which depends on the shape of the granules.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.