| Issue |
E3S Web Conf.
Volume 175, 2020
XIII International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness – INTERAGROMASH 2020”
|
|
|---|---|---|
| Article Number | 05008 | |
| Number of page(s) | 6 | |
| Section | Agricultural Machinery | |
| DOI | https://doi.org/10.1051/e3sconf/202017505008 | |
| Published online | 29 June 2020 | |
Surface quality assurance and process reliability in the processing with a ball-rod hardener
Don State Technical University, 1, Gagarin sq., 344003, Rostov-on-Don, Russia
* Corresponding author: lina_tishenko@mail.ru
This paper presents the results of research on the processing with a multi-contact vibratory hardening tool ball-rod hardener. Theoretical relationships are derived for the calculation of surface roughness, the depth of the hardened layer, and the degree of deformation. The formula for determining the processing time is identified. The technological process reliability with a ball-rod hardener is investigated. Methodology of the process design with regard to its reliability assurance is presented.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.