| Issue |
E3S Web Conf.
Volume 177, 2020
XVIII Scientific Forum “Ural Mining Decade” (UMD 2020)
|
|
|---|---|---|
| Article Number | 03008 | |
| Number of page(s) | 5 | |
| Section | Technical Sciences | |
| DOI | https://doi.org/10.1051/e3sconf/202017703008 | |
| Published online | 08 July 2020 | |
Simulation of stresses and contact surfaces of disk rolling cutters with the rock when sinking in mixed soils
1 National University of Science and Technology “MISiS”, Moscow, Russia
2 Federal State Budgetary Educational Institution of Higher Education “Ural State Mining University”, Yekaterinburg, Russia
* Corresponding author: sg.gubanov@yandex.ru
In this paper, we consider the crack propagation in the rocks during sinking depending on the distance between the cutters. Under the same conditions, the hard and soft rocks form various fracture networks that leads to uneven sinking and decrease in the efficiency of the tunneling machine. In order to study this issue, four ranges of distance between the contact surfaces and various incidence angles of the contact surface were selected. The study includes a system that is a mountain mass layout with a disk cutter the only parameter of which is the tip width or the contact width of the disk cutter with the end-type rock. Simulation of research conditions and finding a solution to the problem were performed using the Autodesk Inventor Nastran 3D simulation software.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.