Issue |
E3S Web Conf.
Volume 187, 2020
The 13th Thai Society of Agricultural Engineering International Conference (TSAE 2020)
|
|
---|---|---|
Article Number | 06001 | |
Number of page(s) | 6 | |
Section | Soil and Water Engineering | |
DOI | https://doi.org/10.1051/e3sconf/202018706001 | |
Published online | 08 September 2020 |
Assessment actual evapotranspiration with R program
1 Rajamangala University of Technology Isan, Department of Agricultural Machinery, Faculty of Engineering and Architecture, Thailand
2 Rajamangala University of Technology Isan, Department of Surveying Engineering, Faculty of Engineering and Architecture, Thailand
* Corresponding author: khanittha.ca@rmuti.ac.th
The aim is an assessment of the actual evapotranspiration of plants by using climate data in Nakhon Ratchasima with the R in the hydrological modeling function of Abtew and Morton CRAE formulation. There are using meteorological data from 2012 - 2016 at Nakhon Ratchasima station. The case analysis shows the results of evapotranspiration are the potential of evaporation of plants each year. Abtew analysis gave higher monthly evapotranspiration results during the dry season than Morton CRAE, but with Abtew formulation gave lower monthly evapotranspiration results during the rainy season than that of the method. The results are 2 ways to use evapotranspiration for water management, which is to analyze the amount of evapotranspiration for use in irrigation systems in order to water for plants should use the form of Abtew form because it can be seen that during the dry season and the plant has a high evapotranspiration value. Form Morton CRAE should be used to assess the potential water use of plants that can be seen in the dry season, the evaporation of plants is also less because in the surrounding environment there isn’t water and has little moisture causing plants to use less water.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.