| Issue |
E3S Web Conf.
Volume 193, 2020
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2020)
|
|
|---|---|---|
| Article Number | 01013 | |
| Number of page(s) | 8 | |
| Section | Agricultural Science | |
| DOI | https://doi.org/10.1051/e3sconf/202019301013 | |
| Published online | 08 October 2020 | |
Analysis of the directions of the development of mechanization units for processing the neartrunk area in the garden
1
Chair of «Processes and machines in agribusiness» of the faculty of mechanization of Kuban State Agrarian University named after I. T. Trubilin, 350044, Krasnodar, Russia.
2
Training-experimental farm “Krasnodarskoe” of Kuban State Agrarian University named after I. T. Trubilin, 350044, Krasnodar, Russia.
* Corresponding author: konovalov.v.i@mail.ru
The final cost of gardening products is influenced by many factors including the tillage costs. Most often, the soil in the near-trunk area of gardens is kept under black fallow, and soil treatment is usually carried out by rotary machines with a vertical axis of rotation. The article presents the analysis of directions of the development of mechanization units for soil tillage in conventional in the near-trunk area of gardens due to information of open registers of FIIP (Federal Institute of Industrial Property) of Russia. As a result of the analysis, the classification of the main types of technical results is performed and the main requirements for tillage machines are formulated, the implementation of which will increase the efficiency of gardening.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.