| Issue |
E3S Web Conf.
Volume 194, 2020
2020 5th International Conference on Advances in Energy and Environment Research (ICAEER 2020)
|
|
|---|---|---|
| Article Number | 01031 | |
| Number of page(s) | 4 | |
| Section | Energy Engineering and Energy Development and Utilization | |
| DOI | https://doi.org/10.1051/e3sconf/202019401031 | |
| Published online | 15 October 2020 | |
Optimization of Product Distribution in the Heavy Oil Vacuum Residue High Value-added Process by Using Additives
1 State Key Laboratory of Heavy Oil Processing, College of Chemical Engineering, China University of Petroleum (East China), Qingdao, Shandong, China.
2 Chemical Engineering Department, Qingdao Product Quality Supervision and Testing Research Center, Qingdao, Shandong, China.
* Corresponding author: Liu: aoyun3002008@126.com; Wang: heavyoil@upc.edu.cn
The increase in demand for fuel oil has brought higher challenges to the high value-added process of heavy oil vacuum residue, especially for delayed coking units. For optimization of product distribution, the effects of reaction temperature and chemical additives were discussed. The results show that high temperature and 1 wt% of the heteropoly acid (HPA) could increase the light oil yield in the experimental delayed coking simulation device.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.