| Issue |
E3S Web Conf.
Volume 194, 2020
2020 5th International Conference on Advances in Energy and Environment Research (ICAEER 2020)
|
|
|---|---|---|
| Article Number | 01035 | |
| Number of page(s) | 4 | |
| Section | Energy Engineering and Energy Development and Utilization | |
| DOI | https://doi.org/10.1051/e3sconf/202019401035 | |
| Published online | 15 October 2020 | |
Effect of ash components and atmospheres on slagging characteristics of high-AAEM lignite gasification
1 Institute of Engineering Thermophysics, Chinese academy of sciences, Beijing 100190, China
2 University of Chinese Academy of Sciences, Beijing, China
* Corresponding author: zhanghaixia@iet.cn
Two kinds of high alkali and alkaline earth metal (AAEM) lignite (TTc and ZDc) were used as fuels, and three atmospheres of CO2, CO/CO2, and H2O (g) were used in the horizontal tube furnace experiments to simulate the gasification conditions in different parts of the boilers. The relevant thermodynamic calculations on the atmospheres and ash compositions were conducted in FactSage 7.2. The results show that both two coals have a high risk of slagging. Decreasing the relative content of SiO2 or increasing the relative content of Al2O3 can increase the ash fusion temperatures (AFTs) of TTc; increasing the relative content of CaO can increase the AFTs of ZDc. Besides, it is not recommended to adjust the relative content of Fe2O3. The proportion of the liquid phase of ZDc ash in CO/CO2 atmosphere is much higher than that of CO2 and H2O (g) in a typical circulating fluidized bed (CFB) gasification temperature interval, while the generation of liquid phase of TTc ash is less affected by atmospheres. The bottom of boilers is the most severe slagging zone, and purging with H2O (g) is a good way to alleviate the low-temperature slagging of the return feeder.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.