| Issue |
E3S Web Conf.
Volume 216, 2020
Rudenko International Conference “Methodological problems in reliability study of large energy systems” (RSES 2020)
|
|
|---|---|---|
| Article Number | 01118 | |
| Number of page(s) | 3 | |
| DOI | https://doi.org/10.1051/e3sconf/202021601118 | |
| Published online | 14 December 2020 | |
Calculation and study of the magnetic field of the stator winding of a turbine generator
1 Tashkent State Technical University, Department of Electrical machine, Tashkent, 100095, Uzbekistan
2 Tashkent State Technical University, Department of Electrical machine, Tashkent, 100095, Uzbekistan
3 Bukhara Engineering Technological Institute, Department of Energy audit, Bukhara, 200117, Uzbekistan
4 Tashkent State Technical University, Department of Electrical machine, Tashkent, 100095, Uzbekistan
An analytical method is presented for calculating the electromagnetic field of the stator winding of an alternating current machine, a turbine generator by solving the Laplace equation, first for a point conductor with a current i, by the method of separating variables when representing the space of the machine location consisting of five regions. The purpose of the work is to show that for all three components of the air gap field created by the winding, the magnetic circuit is common, but the magnetic circuits are different for each of them.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.