Issue |
E3S Web Conf.
Volume 216, 2020
Rudenko International Conference “Methodological problems in reliability study of large energy systems” (RSES 2020)
|
|
---|---|---|
Article Number | 01148 | |
Number of page(s) | 2 | |
DOI | https://doi.org/10.1051/e3sconf/202021601148 | |
Published online | 14 December 2020 |
Electronic recorder of deviation from straightness with optical-light guide analyzer
Tashkent State Technical University, Department of Alternative Energy Sources, University str-2, Tashkent, 100069, Uzbekistan
The article discusses a technical solution aimed at improving the means of alignment measurements, based on measuring the deviation from straightness relative to the reference line set by the laser beam using a recorder, which uses a fiber-optic analyzer with a scanning shutter and an electronic block circuit that provides an increase in the measurement range when maintaining the minimum overall dimensions of the mass and energy intensity of the optoelectronic recorder with high efficiency in obtaining information on linear displacements.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.