| Issue |
E3S Web of Conf.
Volume 225, 2021
II International Conference “Corrosion in the Oil & Gas Industry” 2020
|
|
|---|---|---|
| Article Number | 02003 | |
| Number of page(s) | 3 | |
| Section | Corrosion Monitoring | |
| DOI | https://doi.org/10.1051/e3sconf/202122502003 | |
| Published online | 05 January 2021 | |
The Basic Problems of Breakdown of Oil Refining Equipment
“VNIKTIneftekhimoborudovanie” JSC, 400078, Lenina avenue, 98b, Volgograd, Russia
* Corresponding author: alekstaube@yandex.ru
The paper describes typical cases of failure of elements of oil refining equipment, including the destruction of welded joints made by austenitic electrodes, furnace coil pipes cracking, hydrogen cracking, metallurgical cases and corrosion. The causes of destruction and depressurization are classified with the identification of the main problems and the relations between them.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.