| Issue |
E3S Web of Conf.
Volume 225, 2021
II International Conference “Corrosion in the Oil & Gas Industry” 2020
|
|
|---|---|---|
| Article Number | 03004 | |
| Number of page(s) | 4 | |
| Section | Well Construction and Operation | |
| DOI | https://doi.org/10.1051/e3sconf/202122503004 | |
| Published online | 05 January 2021 | |
Development of a New Aluminium Alloy for Drill Pipes
Light Materials and Technologies Institute (LMTI), 119049, Leninsky Prospect, 6/21, Moscow, Russian Federation
* Corresponding author: Dmitriy.Ivanov2@rusal.com
The new aluminium alloy for drill pipes is one of the 6xxx-series alloys. The alloy has high strength properties at room and elevated temperatures, as well as high corrosion resistance and workability. Semi-finished extruded products from the new alloy have the following properties: UTS = 420 MPa, YTS = 380 MPa, elongation = 10% and YTS150 = 345 MPa, corrosion rate in solution (pH 11) = 0.09 g/m2 h. Based on the obtained properties, the new alloy can be used as a replacement for D16 alloy.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.