Issue |
E3S Web Conf.
Volume 252, 2021
2021 International Conference on Power Grid System and Green Energy (PGSGE 2021)
|
|
---|---|---|
Article Number | 01019 | |
Number of page(s) | 4 | |
Section | Power Control Technology and Smart Grid Application | |
DOI | https://doi.org/10.1051/e3sconf/202125201019 | |
Published online | 23 April 2021 |
Technology and application of operation control of DC distribution network
1 NARI Technology Co., Ltd., Nanjing 211000
2 NARI Group Corporation (State Grid Electric Power Research Institute), Nanjing 211000
3 State Key Laboratory of Smart Grid Protection and Control, Nanjing 211000 )
DC distribution network consists of distributed generation, energy storage, load and AC distribution network, With the rapid development of DC distribution network and the increasing proportion of DC load, the operation mode of DC distribution network is more flexible. Different from the traditional AC distribution network, the traditional AC distribution network has a single operation mode, while the DC distribution network can operate in both parallel mode and island mode. Therefore, a control method suitable for different operation modes of DC distribution network is urgently needed. In this paper, a control method about loop closing and loop opening of DC distribution network is proposed. When receiving the command of loop closing or loop opening from the master station or local monitoring system, the loop closing control is judged by the switch state, fault state and operation state of converter. It solves the problem that the traditional AC distribution network control strategy is not applicable in DC distribution network, it realizes the smooth switching of DC distribution network closed loop operation and opened loop operation. This method has been used in the DC coordinated control device and successfully applied in the national key research and development plan of Suzhou active distribution network.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.