Issue |
E3S Web Conf.
Volume 257, 2021
5th International Workshop on Advances in Energy Science and Environment Engineering (AESEE 2021)
|
|
---|---|---|
Article Number | 01033 | |
Number of page(s) | 4 | |
Section | Energy Chemistry and Energy Storage and Save Technology | |
DOI | https://doi.org/10.1051/e3sconf/202125701033 | |
Published online | 12 May 2021 |
Numerical Analysis of Thermal Management for High Power LED Array
AVIC Chengdu Aircraft Industrial (Group) Co., Ltd., Chengdu 610092, China
* Corresponding author: yingdongshen@163.com
Adequate thermal management to remove and dissipate the heat produced by the LED is one of the main challenges in designing LED applications. In view of the above problems, this paper analyzed a heat sink as a heat exchanger for the LED array via the experiment combined with the numerical simulation. The results show that the heat sink is necessary for the LED array to guarantee reliable and safe operation. Moreover, the influence of the height of heat sink on the heat transfer of the LED array is also analyzed, and the optimized height of the heat sink for the 20W LED array is 20 mm. Considering the heat transfer and the manufacturing cost, increasing the heat sink area blindly is not the best way to reduce the LED junction temperature, and more specific work should be considered.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.